Qin Chunyuan

Universal waterproof coating
1. Product introduction
Universal waterproof coating is a polymer-modified cement-based waterproof material prepared with a unique formula. Its powder is composed of cement, fine It is composed of sand and a unique and very active polymer. The additive is styrene acrylate copolymer emulsion. It not only relies on the surface coating, but also has good permeability, seals the water channel, and can penetrate into the substrate to form branches. shaped crystals, blocking the passage of water molecules within the structure, thereby achieving the best waterproof effect.
Implement the national standard/"Polymer Cement Waterproof Coating" standard
1. Product characteristics
Can be constructed on wet base surfaces.
, strong bonding force with the base surface, the active ingredients in the slurry can penetrate into the capillary pores and micro-cracks in the cement base surface and produce chemical reactions. It blends with the base surface to form a crystalline and dense waterproof layer.
After the slurry is dry and solid, you can directly proceed with the process of pasting ceramic tiles without making a mortar protective layer.
, used for facing the water surface or the back surface, and its waterproof effect remains unchanged.
. The main components of this product are inorganic materials, which have no aging problem and have permanent waterproof effect.
, non-toxic, harmless, green and environmentally friendly.
2. Scope of application
Indoor and outdoor concrete structures, cement plastering, waterproofing of interior and exterior walls, kitchens and bathrooms.
Waterproofing of building parts with stable structures such as factories, factories, water conservancy projects, grain warehouses, tunnels, underground parking lots, floor walls, swimming pools, drinking water pools, etc.
3. Base surface treatment
The base surface must be stable, clean, flat and smooth, free of dust, oil, shedding and other debris.
Obvious pores and blisters must be blocked and smoothed with cement mortar, and sharp edges should be removed.
If the base surface is dry, it is better to moisten the base surface until there is no clear water.
4. How to use
First pour the slurry into the container and stir evenly, then slowly pour the powder into the slurry and stir thoroughly to form a uniform paste without particles and precipitation. Pasty.
Maintain intermittent stirring during operation to prevent precipitation.
Use a brush or roller to apply glue directly on the base surface. Do not leave any holes for moisture-proofing. Apply one layer for waterproofing and two to three layers.
The second layer should be applied in a staggered direction with the first layer.
5. Normal dosage
Thickness, about square meters.
, thickness, about/㎡.
6. Precautions
Other covering layers can be made only after the waterproof layer is completely dry.
For buildings, pipes, expansion joints, and post-casting tapes that may experience slight vibrations, movement, or cracks, use Adix flexible waterproofing slurry for waterproofing.
The construction temperature should be ℃℃, and the construction environment must be ventilated.
.
7. Storage method
Store in a cool and dry place. Unopened products can be stored for one month.
8. Packaging
kg/set, kg/barrel, kg/barrel, kg/barrel